Tommy
Member 
Member #: 9260 Posts 1
Registered: 5-1-2011 Member Is Offline Mood:
|
| posted on 5-1-2011 at 22:08 |
|
|
Old school Board Help
Hi All
Hope some one can help i have an old long board wind surfer that i just snapped the rubber pivot part of the mast foot its a type that
at the end has a groved plastic aprox 1" bit of plastic that drops into a hole and then you slide the metal rod both side in to lock
the mast foot into the board. anyone know were i can find somthing like this or can i change the mast track to something newer any help
anyone can give would be great
Cheers
Tommy
Would pics help????
[Edited on 6-1-2011 by Tommy]
|
|
|
justal
|
| posted on 6-1-2011 at 07:05 |
|
|
Hi Tommy, I now the sort you mean but they are pretty old school.
Your best bet will be to phone someone like Boardwise and see if they have one or see if you can get an adaptor for the mast track...
You may even be able to remove the bit with the metal rods that hold the mastfoot in place from the existing masttrack and then be able
to fit a more modern deckplate into it. I'm sure some one will have one of the old-style ones somewhere though.
You could take a look on eBay for people selling boards of that vintage as well as they might have a spare deckplate so it could be
worth contacting them.
It is VERY old though so probably not spending much time or money on the board.
Al.
URL: Pixelwave Design - Website Design Wales
Shop: Website Templates
Personal Weblog: A Simple Life of Luxury in West Wales
|
|
|
Pixelwave Web Design.
justal@forces-of-nature.co.uk